Sporlan - 310325 - Coil MKC-1

Description

Sporlan - 310325 - Coil MKC-1 JAQ 24V 50/60Hz w/Junction Box Orange Leadwire with 1/32" Insulation
Solenoid Coil
The interchangeability of solenoid coils is necessarily limited by considerations of the varying requirements of power and plunger movement. Nevertheless, only three coil sizes are required for the extensive line of Sporlan Solenoid Valves. Each coil is interchangeable between a number of valves within a given size range.
Sporlan Solenoid Valve coils are available in many voltage and cycle ratings. The standard coils required are listed on the Specification pages for the various valves. Dual voltage, direct current (DC) and other alternating current (AC) coils are available for most valve types at slight additional cost. For other voltages and cycles, consult Sporlan, Washington, MO.
Color Coded Lead Wires
- For ease of identification, coils are manufactured with the following colored lead wires:
All other coils are supplied with black lead wires.
Orange - 24/50-60
Blue - 120/50-60
Yellow - 208/50-60
Red - 208-240/50-60
Black, Bleu, Yellow, Red - Dual Voltage
Leads
on valves with a conduit boss are 18" long while coil leads on valves with a junction box are 6" in length.
Junction Box
- All solenoid valves are available with either an integral junction box or a 1/2" conduit connection at no extra charge. All valves are automatically supplied with the integral junction box. If a conduit boss is required, it must be specified on the order.
All junction boxes are equipped with grounding screw provisions and marked in accordance with UL and CSA recommendations.
Conduit Boss - Nema Rating
- The Standard (O) MKC-1 and (O)MKC-2 coil assemblies with conduit boss type yokes will satisfy Nema 4 and IP55 (Rain Tight) as well as Nema 1, 2, 3, 3R, 3S, 12 and 13.
DIN Connector
- (O)MKC-1E and (O)MKC-2E coils with Female DIN Connectors will satisfy IP65.
(O)MKC-1E and (O)MKC-2E coils with Female DIN Connectors will satisfy IP65.
- Only two coil sizes are required with the complete line of Sporlan Solenoid Valves.
The molded MKC-1 coil will fit the old style KC-1 coil.
The molded MKC-2 coil will fit the old style KC-2 coil.
Since the molded coils are a complete magnetic assembly, the old housing and related parts should be discarded when replacing the old KC-1 or KC-2.
California residents: see
Proposition 65
Warning