Matek Sys Flight Controller F411-WTE FC DIY Quad Drone Race New Stock Ready Ship

Description

100% Original
Fair Pricing
Fast Shipping
BUY NOW!
Matek Sys Flight Controller F411-WTE FC DIY Quad Drone Race New Stock Ready Ship
FC Specifications
MCU: 100MHz STM32F411CEU6
IMU: BMI270 (SPI)
Baro: SPL06-001 (I2C)
OSD: AT7456E (SPI)
Blackbox: No
2x Uarts
2x Full Softserial
6x PWM outputs (2x Motors, 4x Servos)
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter on UART2-RX for SBUS input
Switchable Dual Camera Inputs
Vbat power ON/OFF switchable for VTX and camera
PPM receiver: not supported
Power
6~30V DC IN (2~6S LiPo)
132A Current Sense (Scale 250)
PDB/Current sense resistor: 90A continuous, 132A burst.
BEC 5V 1.5A for FC & Peripherals
BEC Vx 5A for servos, 5V/ 6V option
Vbat for VTX and camera (ON/OFF switchable)
LDO 3.3V 200mA
Battery Voltage Sensor: 1k:10k
FC Firmware
INAV Target: MATEKF411TE ( INAV4.1 or newer)
Physical
Dimensions: 31 x 26 x 16.5 mm
Mounting: 22 x 22mm, Φ2mm
Weight: 10g
Including
1x FC F411-WTE
Dupont 2.54 pins  (Board is shipped unsoldered)
Payment
Shipping
Returns
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fair Pricing
Fast Shipping
FC Specifications ---MCU: 100MHz STM32F411CEU6 ---IMU: BMI270 (SPI) ---Baro: SPL06-001 (I2C) ---OSD: AT7456E (SPI) ---Blackbox: No ---2x Uarts ---2x Full Softserial ---6x PWM outputs (2x Motors, 4x Servos) ---1x I2C ---4x ADC (VBAT, Current, RSSI, AirSpeed) ---3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) ---Built in inverter on UART2-RX for SBUS input ---Switchable Dual Camera Inputs ---Vbat power ON/OFF switchable for VTX and camera ---PPM receiver: not supported Power ---6~30V DC IN (2~6S LiPo) ---132A Current Sense (Scale 250) ---PDB/Current sense resistor: 90A continuous, 132A burst. ---BEC 5V 1.5A for FC & Peripherals ---BEC Vx 5A for servos, 5V/ 6V option ---Vbat for VTX and camera (ON/OFF switchable) ---LDO 3.3V 200mA ---Battery Voltage Sensor: 1k:10k FC Firmware ---INAV Target: MATEKF411TE ( INAV4.1 or newer) Physical ---Dimensions: 31 x 26 x 16.5 mm ---Mounting: 22 x 22mm, Φ2mm ---Weight: 10g Including ---1x FC F411-WTE ---Dupont 2.54 pins (Board is shipped unsoldered) ![Matek Sys Flight Controller F411-WTE FC] (https://cdn.shopify.com/s/files/1/0948/3076/files/F411-WTE_1.jpg?v=1656986262)![Matek Sys Flight Controller F411-WTE FC] (https://cdn.shopify.com/s/files/1/0948/3076/files/F411-WTE_2.jpg?v=1656986280)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F411-WTE_3.jpg?v=1656986294)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F411-WTE_4.jpg?v=1656986307)![image] (https://cdn.shopify.com/s/files/1/0948/3076/files/F411-WTE_layout.jpg?v=1656986322)
100% Original
BUY NOW!
Matek Sys Flight Controller F411-WTE FC DIY Quad Drone Race New Stock Ready Ship
FC Specifications
MCU: 100MHz STM32F411CEU6
IMU: BMI270 (SPI)
Baro: SPL06-001 (I2C)
OSD: AT7456E (SPI)
Blackbox: No
2x Uarts
2x Full Softserial
6x PWM outputs (2x Motors, 4x Servos)
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter on UART2-RX for SBUS input
Switchable Dual Camera Inputs
Vbat power ON/OFF switchable for VTX and camera
PPM receiver: not supported
Power
6~30V DC IN (2~6S LiPo)
132A Current Sense (Scale 250)
PDB/Current sense resistor: 90A continuous, 132A burst.
BEC 5V 1.5A for FC & Peripherals
BEC Vx 5A for servos, 5V/ 6V option
Vbat for VTX and camera (ON/OFF switchable)
LDO 3.3V 200mA
Battery Voltage Sensor: 1k:10k
FC Firmware
INAV Target: MATEKF411TE ( INAV4.1 or newer)
Physical
Dimensions: 31 x 26 x 16.5 mm
Mounting: 22 x 22mm, Φ2mm
Weight: 10g
Including
1x FC F411-WTE
Dupont 2.54 pins  (Board is shipped unsoldered)
Payment
Secure & Easy Ordering. Orders can be placed online using PayPal to ensure a safe and secure transaction and guarantee you privacy. The address in Paypal is the address your order will be shipped to. We are only able to dispatch goods once payment has cleared. All refunds are issued via PayPal only.
Shipping
Fast worldwide shipping with tracking number. We reserve the right not to ship to any unconfirmed PayPal addresses. Shipments usually takes 5-15 working days to your PayPal registered address.
ITALY, ISRAEL, SPAIN, GERMANY, EASTERN EUROPE, SOUTH AMERICA, AFRICA AND MIDDLE EAST may take from 10-25 days due the slow postal services and strict custom clearances.
Returns
After receiving the item, contact us within : 30 Days
Refund will be given as : Money back or item exchange (buyer's choice)
Return shipping : Buyer pays return shipping
100% Original
Fast Shipping
Fair Pricing
FC Specifications
MCU: 100MHz STM32F411CEU6
IMU: BMI270 (SPI)
Baro: SPL06-001 (I2C)
OSD: AT7456E (SPI)
Blackbox: No
2x Uarts
2x Full Softserial
6x PWM outputs (2x Motors, 4x Servos)
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
Built in inverter on UART2-RX for SBUS input
Switchable Dual Camera Inputs
Vbat power ON/OFF switchable for VTX and camera
PPM receiver: not supported
Power
6~30V DC IN (2~6S LiPo)
132A Current Sense (Scale 250)
PDB/Current sense resistor: 90A continuous, 132A burst.
BEC 5V 1.5A for FC & Peripherals
BEC Vx 5A for servos, 5V/ 6V option
Vbat for VTX and camera (ON/OFF switchable)
LDO 3.3V 200mA
Battery Voltage Sensor: 1k:10k
FC Firmware
INAV Target: MATEKF411TE ( INAV4.1 or newer)
Physical
Dimensions: 31 x 26 x 16.5 mm
Mounting: 22 x 22mm, Φ2mm
Weight: 10g
Including
1x FC F411-WTE
Dupont 2.54 pins  (Board is shipped unsoldered)