-40%
F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with
F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with
F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with
F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with
F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with
F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with

F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with

$ 33.79

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Brand: Undisclosed
  • MPN: Does not apply
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Condition: New

    Description

    F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with
    Compatible Drone Brand:GoPro
    Size:Betaflight OSD
    Weight:13g-14g
    Model Number:F25773-F25774
    Compatible Drone Model:PID BEC Flight Controller Tower
    Package:Yes
    F411 Mini Micro F4 Build-in Betaflight OSD to Adjust PID BEC Flight Controller Tower with 4in1 28A / 35A ESC 2-4S DSHOT MultiShot for 85mm-250mm RC Drone Quadcopter
    Specifications
    Pay attention:
    -The FSD F411 flight controller will support a gyro loop rate of up to 32khz however maximum pid loop frequency is limited to 16khz. To run at this speed you will need to overclock the CPU by entering the code: Set cpu_overclock = 120mhz in CLI.
    -In betaflight 3.4.0 and above CPU temperature can be monitored directly in betaflight osd.
    -We suggest to match FSD 35A 4in1 ESC with 2205(<2600kv)-2207(<2500kv) motors.
    -This combo is the best after we testing many times and we seek truth from facts but don't boast.
    FSD F411 FC Betaflight firmware download:
    Betaflight_3.3.3_FULLSPEEDF411.hex
    Betaflight_3.4_FULLSPEEDF411.hex
    Betaflight_3.5.0_FULLSPEEDF411.hex
    Butterflight_3.5.0_FULLSPEEDF411.hex
    Specification:
    Brand name: JMT
    Item name: FSD428 Flight Tower
    Weight: 7.8g
    Usage: for 85mm-250mm Frame Kit
    JMT F411 Flight Controller Board
    CPU: STM32 F411
    Input Voltage: 2-4S Lipo
    Built-in Betaflight OSD to adjust PID
    BEC Output: 5V/3A
    Size: 27.5x27.5mm board, 20mm mounting holes (M2)
    Weight:3.4g
    Support SBUS/PPM/DSM receiver
    JMT 28A BLHeli_S 2-4S ESC
    Input Voltage: 2-4S Lipo battery
    Constant Current: 28A
    BEC Output: NO
    Size: 27x27mm (main board)
    Installing Hole:20x20mm,M2
    Weight: 4g
    MOS Tube: TOP QUALITY MOSFET
    Protocol: DSHOT600/300/150/Oneshot125/42,MultiShot
    JMT 35A BLHeli_S 2-4S ESC
    Input Voltage: 2-4S Lipo battery
    Constant Current: 35A
    BEC Output: NO
    Size: 27x27mm (main board)
    Installing Hole:20x20mm,M2
    Weight: 5.1g
    MOS Tube: TOP QUALITY MOSFET
    Protocol: DSHOT600/300/150/Oneshot125/42,MultiShot
    F411 Flight Tower with 28A
    4in1 ESC
    Package Included:
    1x F411 Flight Controller
    1x 28A 2S-4S 4in1 ESC
    F411 Flight Tower with 35A
    4in1 ESC
    Package Included:
    1 x F411 Flight Controller
    1 x 35A 2S-4S 4in1 ESC
    1 x 6 Pin Cable
    8 x M2x5 standoffs 5mm tall Nylon
    4 x M2 Nylon Nuts