-40%
EMAX Mini Magnum II 2 F4 Flying Tower Flytower 4in1 OSD VTX Flight Controller
$ 51.22
- Description
- Size Guide
Description
BGNING Bicycle Bike Motorcycle Handlebar Mount Clip Holder 1/4" Tripod Adapter6.92 USD
2.0 USD
PCIE PCI-E Riser Card 1x to 16x 1 to 4 USB 3.0 Slot Adapter For Bitcoin Mining
21.85 USD
24.83 USD
Free shipping
12%
off
SKYRC TORO TS50 ESC Sensored Brushless ESC for 1/10 RC Car Buggy Rouring Car
45.38 USD
50.99 USD
Free shipping
11%
off
10PCS PCI-E PCIE 8p Female to Dual 8pin 6+2p Male GPU Video Card Power Cable
20.9 USD
23.75 USD
Free shipping
12%
off
SKYRC T100 Dual-channel Charger 50Wx2 Intelligent Identification for LiPo/LiIon
45.38 USD
50.99 USD
Free shipping
11%
off
SKYRC TORO TS160 Brushless ESC Metal Shell for 1/10 1/12 Competition Racing Car
140.17 USD
157.49 USD
Free shipping
11%
off
New EMAX Mini Magnum II 2 F4 Flying Tower Flytower 4in1 OSD VTX 6S BLHELI 32BIT 35A Flight Controller for FPV Racing Drone Parts
Mini Magnum 2 F4 6S BLHELI 32BIT:
Introducing the next generation of the famed Magnum line, the Mini Magnum 2.
Next Generation ESC Board:
Featuring a 35amp BLHeli32 capable ESC board, current sensor, on-board capacitors, and capable of running 2-6s lipo batteries, no longer will there be limits to the capabilities of an all-in-one stack in this 20*20 formfactor.
Tuning, Easier than ever:
Engineered around an F4 processor with an MPU6000 gyro, tuning and perfect flight performance will be easier to achieve than ever. Including built-in programmable RGB LEDs, distinction between different builds and custom status updates offer a wide variety of customizability for any situation and requirement.
Remote channel control:
Ytilizing a newly engineered video transmission frequency controller, channel selection can now be programmed from an exrernal transmitter without On-Screen-Display, information regarding your craft will be easy to access while in flight directly on your video feed.
Proven Formfactors:
With all the electronics needed, assembled together in an accessible package, building a custom craft will only require a frame, camera, set of motors, and a compatible receiver.
Instalattion has never been easier, thans to the universal formfactor of the tower system.
Weight specification
Total weight: 17.21g
Flight controller
(OMNIBUSF4 Firmware)
STM32F405 MCU
MPU6000 accelerometer/gyro (connected via SPI)
On-board OSD
On-board Buzzer
Integrated 5V/3A BEC
Dedicated PPM/ Sbus receiver input
30x27mm board with 20mm mounting holes.
ESC
Continuous current 35A ( max burst 40A)
Supply voltage 2-6S Lipo( 1700kv Motor LIMIT for 6S )
STM32F051K6U6 MCU
BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125
Top quality MOSFET
3oz high TG PCB board
32x37mm board with 20mm mounting holes.
Current Sensor
VTX
Frequency band:5658-5945MHz (FCC Compliant Channels / with HAM unlock)
TBS Audio Control
Channel:37
Transmit power:13dBm/23dBm(25mW/200mW)
Supply voltage:4.5V-5.5V
Antenna port :50Ω
On Sep-12-18 at 22:51:22 PDT, seller added the following information: