-40%
BrainFPV Radix 2 H7 Flight Controller
BrainFPV Radix 2 H7 Flight Controller
BrainFPV Radix 2 H7 Flight Controller
BrainFPV Radix 2 H7 Flight Controller
BrainFPV Radix 2 H7 Flight Controller
BrainFPV Radix 2 H7 Flight Controller
BrainFPV Radix 2 H7 Flight Controller

BrainFPV Radix 2 H7 Flight Controller

$ 39.59

Availability: 32 in stock
  • All returns accepted: Returns Accepted
  • Condition: New
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: BrainFPV
  • MPN: Does not apply

    Description

    The RADIX 2 is the latest generation flight controller by BrainFPV. It is the successor of the legendary RADIX flight controller and everything has been vastly improved. From a blazing fast H7 processor running at 480 MHz, an improved graphical OSD, a built-in voltage regulator that can handle up to 8S (35 V), to 8 motor outputs, driverless flashing, and more.
    The RADIX 2 is designed to be compatible with any 4-in-1 motor controller (ESC) on the market. For octocopters, you can use the included 5-pin cable to connect a second 4-in-1 ESC for motors 5 to 8. All outputs fully support bi-directional DSHOT that enables the motor controllers to send back real-time telemetry that is used by the flight controller to perform adaptive RPM based noise filtering.
    If you prefer to use a separate ESC for each motor, the companion product, the RADIX 2 Power Board (PB) got you covered. It is designed for serious power and can handle up to 8S (35 V) battery voltage and 160 A constant current (220 A burst). It also features an LC filter and voltage regulator for clean power to the flight controller and connected peripherals.
    Specifications
    :
    New Processor:
    STM32 H7 processor running at 480 MHz with 1 MB RAM
    New Gyro:
    New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
    New Baro:
    Latest generation Bosch Sensortec BMP388 barometer accurate altitude readings
    Better OSD:
    Improved full graphical on-screen-display (OSD) with gray levels and transparency
    Dual camera input:
    Camera can be switched using a switch on the RC transmitter
    VTX pit switch
    : to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage. Switch has an integrated high-speed resettable fuse to prevent damage due to accidental shorts
    32 MByte built-in flash memory:
    30 MByte available for logging and settings storage
    Driverless flashing
    with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
    RGB status LED
    with customizable color
    8 motor outputs:
    all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).
    6 serial ports (UARTs):
    all with integrated inverters for S-BUS and other inverted protocols
    I2C port
    for external sensors
    RGB LED output
    Buzzer output
    Camera control
    output for configuring analog cameras
    Analog RSSI input
    5 V regulator
    with 1.5 A output and up to 8S (35 V) input voltage
    USB Type-C connector
    Size: 37 x 37 mm (30.5 mm hole spacing)
    Weight: 7g
    You can use 2
    4-in-1 ESCs for an octocopter. Holy mother of FPV!  It comes with cables and connectors to easily make your own wiring harness. Happy Christmas.
    Includes
    :
    1x BrainFPV Radix 2 H7 Flight Controller
    1x Wire Harness Set
    1x Sticker Set
    4x Anti-vibration Grommets