BetaFPV F3 Brushed Flight Controller (Frsky Rx + OSD)

Description

Excelrc
Welcome to Excel Radio Control eBay Store!
Contact Seller
Sign up for Shop newsletter
Home
Shop By Category
Categories
DJI
Chargers and Accessories
FPV & Racing
Kyosho Mini Z
RC Surface
Drones Other
Close Outs
Tools Connectors Cables Wire
Hobbies
Other
Shop By Brand
Brands
DJI
Kyosho
DJIParts
ExcelRC
Gemfan
Redcat Racing
Yokomo
GL Racing
PN Racing
Arrma
About Us
Shipping
Returns
Feedback
Contact Us
BetaFPV F3 Brushed Flight Controller (Frsky Rx + OSD)
Why ExcelRC?
Fast Shipping
Free Expert Advice
100% Positive
Customer Feedback
Excellent After Sales
Support
eBay Money Back
Guarantee
PRODUCT DESCRIPTION
V1.1 version is available now and the biggest improvement is the integrated Frsky Rx via SBUS protocol. It has a noticeable improvement when the drone turn around.
KEY FEATURES
The world's first compatible BetaFlight OSD, FrSky Rx, BetaFlight firmware, born for acro F3 flight controller for the Micro Whoop or Blade Inductrix quadcopter.
Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings
Designed to work with current Tiny Whoop or Blade Inductrix setups
Built in Frsky D8 protocol native receiver (SBUS), compatible with almost ALL Frsky radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module
The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
Here is the comparison chat of BETAFPV F3 brushed flight controllers.
SPECIFICATIONS
CPU: STM32F303CCT6
Six-Axis: MPU6000
ESC: All FETs are rated at 6.3A maximum
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: BETAFLIGHTF3 3.1.7
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: Frsky D8 potocol (SBUS)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 3.2g
BetaFlight OSD
Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad's PID, rates, filters and other settings.
How would do an OSD with the AIO cameras?
There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. There is some examples.
BETAFPV H02 Camera, FX806TC, VM275, FX805, Eachine XT02 etc aio camera vtx are available to use the OSD function.
BETAFPV Support Freshdesk for BetaFlight OSD Setup.
Status LED
This board has 3 LEDs to indicate the status, including Receiver LED ( Red ), FC Status LED ( Red ) and FC Power LED ( Blue ). FC Status LED and Power LED are on the top of the board and Receiver LED is on the button of the board.
LED
Status
Description
Receiver LED ( Red )
Solid
Connected or in bind mode
Receiver LED ( Red )
Flashing
Not connected
Power LED ( Blue )
Solid
Power on
Status LED ( Red )
Solid
Motor Armed
These are 2 high brightness green LEDs on each side of the board. You could find your drone easily when flying.
Frsky Receiver
Currently the built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules with International Firmware. With SBUS connection protocol, i
t has a noticeable improvement when the drone turn around.
Some pilots would complaint that it is definitely not a long range FC. It looses signal with my transmitter far too often and for what appears to be no reason. This issue is often caused by the location of the antenna. You should keep the antenna away from the FC board to get a stronger signal. For example, run the singal upwards. Thanks for Harley Finberg's advice.
Assemble Guide
The mounting pattern of this board is compatible with all the Tiny Whoop airframes, like the original stock Blade Inductrix frame or the Beta75 75mm frame. For other frames like Eachine E010 or E011, a little bit modify is need.
PACKAGE
1 * F3 OSD brushed flight controller V1.1 ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
1 * 55mm PH-JST 1.25 power cable pigtail
SKU: 2990000051400
MPN: 00312954
UPC: Not Applicable
EAN: Not Applicable
About us
Excel RC and Excel Drones are helping RC Surface and Drone customers around the globe with all their needs!.
Shipping
We do combine shipping. This is difficult to to do with ebay shipping settings. If the shipping seems incorrect, please either request an invoice or contact us after purchasing so that we refund the extra shipping charges.
We AIM to get orders dispatched within 24 hours Monday-Friday, After we have confirmed payment.
We use are USPS, FedEx and DHL. We send out emails once we have received conformation from the warehouse.
FedEx 2 Day is Guaranteed 2 business day delivery. Saturday delivery is available for no extra charge.
USPS First Class and Package service can take 2-7 days to arrive.
International Customers: Please do not ask us to change customs value or split your shipments. We cannot do this!
Payment
On eBay We Accept Ebay Payments and Paypal.
Make sure your shipping address is correct before you checkout.
eBay Payments and PayPal prohibit adjustment of the delivery address.
Once the order is shipped we cannot change your shipping address and We are not responsible for item(s) delivered to an incorrect address you provided.
Return
We are happy to Cover all Return Costs For Faulty/Incorrect Items, as long as they are reported within 5 Days after the item has been signed for. If you have changed your mind about an order you will be required to cover return shipping costs, there may be a restocking fee if the returned item is damaged or missing items. We will not accept returns if the item is not it the original packaging or used.
DJI and FPV products, including, but not limited to; batteries, flight controllers, other electronics cannot be returned once activate or used. Please contact us for manufacturer warranty information.
Feedback
As a seller Positive Feedback is very important to us, as well as our customers. We want all our customers to be happy with there orders, If we have made an error we do apologize, we are only human, let us know so we can rectify it for you, please do speak with us before you Leave us Negative feedback we will do everything we can to put it right.
Excel Drones and Excel RC are DJI authorized. Visit our retail store in Michigan or see us online. We are all about drones!
Categories
Dji
FPV & Racing
Kyosho Mini Z
RC Surface
Other Drones
Chargers & Accessories
Close Outs
Tools Connector Cable Wire
Top Brands
DJI
Kyosho
Excel RC
Gemfan
Redcat Racing
Yokomo
GL Racing
PN Racing
Arrma
Home
About Us
Shipping
Return
Feedback
Contact Us
We eBay Payments For
Copyright © 1995-2022 eBay Inc. All Rights Reserved.
Design by
FFK
eBay store powered by Shopping Feed.