-40%
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*
3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*

3DR Pixhawk Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter xr*

$ 81.84

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: China
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Custom Bundle: No
  • Type: Flight Controller
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • MPN: Does Not Apply
  • Model: 3DR Pixhawk Mini
  • Condition: New
  • Modified Item: No

    Description

    Description
    3DR Pixhawk Mini Flight Controller Kit 32 Bit ARM Cortex PX4 for Mini Quadcopter
    The Quick Start Guide
    Product Description:
    - Pixhawk Mini,the next generation autopilot from 3DR.Building on the success of the original Pixhawk,Pixhawk Mini offers more in a 60% smaller package.
    - Pixhawk Mini has been designed in collaboration with HobbyKing and is proudly based on the PX4 open-hardware project.It is compatible with and optimized for the PX4 flight stack.
    - One-third the size of the original Pixhawk
    - Improved sensors lead to more stable,more reliable flight and navigation
    - Included M8N GPS receives all of the GNSS constellations for better coverage in more places
    - The hard-to-use DF13 connectors of the original Pixhawk have been replaced by intuitive Micro JST
    Improvements over the original Pixhawk:
    - Smaller,a third of the size.
    - Rev 3 processor for long term software support.
    - Improved sensors,both primary and secondary IMU MPU9250 and ICM20608 for more reliable flight.
    - Included GPS module uBlox M8N GPS/GLONASS/BeiDou receiver for faster and stronger GPS lock.
    - Micro JST rather than the hard-to-use DF13 connectors.
    - Integrated piezo speaker and safety switch.
    - Natively supports 4S batteries with the included PDB.
    Features:
    - Advanced 32 bit ARM Cortex M4 Processor running NuttX RTOS
    - 8 PWM/servo outputs
    - Abundant connectivity options for additional peripherals (UART,I2C,CAN)
    - Redundant power supply inputs and automatic failover
    - Integrated safety switch and optional external safety button for easy motor activation
    - Multicolor LED indicator
    - Integrated multi-tone piezo audio indicator
    - MicroSD card for long-time high-rate logging
    GPS module:
    - Based on the uBlox M8N
    - Concurrent reception of up to 3 GNSS (GPS,Galileo,GLONASS,BeiDou)
    - Industry leading–167 dBm navigation sensitivity
    - Security and integrity protection
    - Supports all satellite augmentation systems
    - Advanced jamming and spoofing detection
    - Product variants to meet performance and cost requirements
    Weight and Dimensions:
    - Pixhawk Mini:38x43x12 mm;15.8 grams
    - GPS module:37x37x12 mm;22.4 grams
    Note:
    When installing the 3DR telemetry radios,use the connectors that come with Pixhawk Mini,rather than those that come with the radios.
    Package List:
    - 1 x Pixhawk Mini Autopilot
    - 1 x GPS module
    - 1 x Quad Power Distribution Board
    - 1 x 8 Channel PWM Breakout board
    - 1 x 4 pin i2c cable and breakout board
    - 1 x RC-in cable for PPM/SBUS
    - 1 x 6 to 6/4 "Y" adapter for GPS and additional I2C devices
    - 1 x 6 pin cable (2)
    - 1 x 6 pin JST to DF13 for legacy telemetry radio
    - 1 x External safety switch
    - 1 x 8 channel PWM breakout cable
    - 1 x Mounting foam
    Payment Terms
    1.We accept PayPal only.
    2.All major credit cards are accepted through secure payment processor PayPal.
    3.Payment must be received within 7 business days of auction closing.
    4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    Shipping Terms
    - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
    Return Terms
    1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
    2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
    3. We reserve the right to refuse any returns for objective reasons.
    Custom Duties & Taxes
    1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
    2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
    Feedback
    1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
    On May-09-21 at 21:01:04 PDT, seller added the following information: