3DR Mini OSD FPV MinimOSD MAVLink OSD for APM 2.6 APM 2.52 Flight Control Board

Description

3DR Mini OSD FPV MinimOSD MAVLink OSD for APM 2.6 APM 2.52 Flight Control Board for Rc Drone
MINI OSD English font, if you need to connect the flight control (APM, PIX flight control) cable, please contact.
Note: This osd can only be used in flight controllers that support the mavlink protocol such as APM pirates. It cannot be used by gps alone. It can only read the mavlink protocol.
If it is used alone, please connect the TX RX to the APM together
If it is used together with data transmission, the TX definition of the OSD is not connected, and the RX can be directly
This OSD automatically recognizes the camera video format. But if the camera is not connected, there is a solder joint on the back to choose the format when there is no camera output. The default is N. Soldering PAL is the output of PAL.
MinimOSD, is an OSD based on Arduino. This is specially designed for the flight control of ArduPilot MEGA and MAVlink protocol
Its main components are an Arduino ATmega328 MCU and a MAX7456 monochrome screen overlay chip. Programming is via an FTDI compatible 6-pin header
It features two separate power and ground sections for the OSD-capable analog stage: a 5 V section for the ATMEGA and the OSD-capable digital stage, powered via the FTDI cable or other 5 V source; and a regulated 5 V The analog stage portion of the OSD function of V is powered through the video/output header, capable of handling up to +12 V input. Solder jumper wires to combine the two parts for power and ground, if needed.
MinimOSD uses a high-cost and high-efficiency DC-DC regulator, not comparable to other vendors' old v0.1. The official original version v0.1 uses a linear regulator. When the power supply is independent, the input of 12V will cause serious heat generation. Although parallel power supply can solve the heat problem, it brings two other problems: increasing the power supply pressure of the flight controller and to signal noise.
MAVLink-OSD cancels the single power supply mode selection jumper and completely operates in an isolated dual power supply mode.
Hardware features:
Size: 39mm×19mm (excluding pin header)
Weight: 6g (without cable)
If you need to modify OSD parameters, please bring your own or purchase FTDI.
Shipping:
The shipping costs to all countries are the same.
Item will be shipped within 1-2 business days
Items will be checked carefully before sent out.
We will use air bubbles to wrap the items carefully
Sales Tax:
Sales Tax Depends on the import tax policy of your country.
Warranty & return:
For ensuring all the items are in good quality, we will test all products before the packages were sent out .
30 days warranty from the purchased date. Please contact us via email before returning the defective item.
Return items should include the original packaging and all accessories.
Only defective product will be offered exchange.
Contact us :
Our office hours are :
- 8:30 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 8:30 a.m. to 1:00 p.m. (GMT +8) of Saturday
- 8:30 a.m. to 6:00 p.m. (GMT +8) of Sunday
- Our office is closed on public holidays (China). We apologize for the late reply during the holidays.
We have always been trying to provide the best service and reliable products for every customer. Please contact us
to resolve any issue before leaving negative feedback . we will assist you in any way possible and aim to answer all emails .